Heat Resistant Tile Grout

Vitcas® Heat Resistant Tile Grout Resistant to 1000⁰C for grouting tiles which have been fixed with Vitcas® Tile Adhesive.

Applications:  Do not grout tiles immediately after fixing. Leave for a few days to be sure that the adhesive has had time to set properly before grouting. Mix with water to a trowelling consistency and apply with a grouting float. After 30 minutes wipe off the excess with a damp cloth.

Coverage is approximately 2 m2 per kg for 200mm x 200mm tiles with a 3mm joint.

product

Related products

product

High Temperature Plasterboard*

Vitcas® HT Plasterboard is a dense, non-flammable A1 fire rated board mostly for use in situations where the temperature could be too high for gypsum products.
product

Heat Resistant Tile Adhesive

Vitcas®Heat Resistant Tile Adhesive is in cartridge packaging for easy use. Ready-mixed tile cement for high temperatures where ordinary tile cements are inadequate for the long term retention of tiles.
product

Heat Resistant Tile Adhesive

Vitcas® Heat Resistant Tile Adhesive is a ready mixed tile cement acting as a wet adhesive for fixing tiles in any indoor high temperature condition. Where long-lasting heat retention is required. Resistant to 1000 oC.
product

Adhesive Sealer - Vitcas PVA

Vitcas PVA, HT Boards Adhesive Sealer, is used on surfaces, tiles and fire boards prior to the application of  Vitcas® Heat Resistant Tile Adhesive, Heat Resistant Plaster and Fireplace Render.